Cardboard Box Laundry Hamper Tutorial

I was cleaning out my room yesterday when this idea sprang on me. I've been looking for a laundry basket for awhile., but couldn't find anything I really liked in my price range.

photo link 

I was looking at something like this. But all the baskets I liked were $30-$60, which I didn't want to pay. So on the whim I got to thinking "why couldn't I make my own using a cardboard box?".

And I did.
Here is my new "basket" 

I love that I now have a lovely laundry basket that matches my room! Plus all it took was a cardboard box, some fabric I had on hand and a little elbow grease! Plus it was under $10!
Its not quiet at sturdy as a normal basket, partially due to the box I picked. You could even add some strap to the wide of the box if you want to carry it around.



Supplies:
1 yard Fabric for box
1 1/2 yard Fabric for lining
Cardboard Box
Hot glue

I also used: 
Felt
Fleece



Here's my box!



My box was falling apart at the bottom so I started by taping it up.



Then I cut my box down to about 18".



I decided to cover the top of my box with felt to smooth out the cut marks. Cut your felt sheets into 4 equal strips.



Hot glue them around the top of your box. I used about 1 1/2 felt sheets.



Starting with your long sides hot glue it along the bottom of your box, leaving some extra off the edge for folding over. 



Pull it tight and glue it across the top and glue. I only had about 2/3 yrd fabric or I would have made my pieces large so I could pulled it up and over to the inside of the box. Although the living will cover it.



Finally pull the edges tightly around the sides and hot glue into place. Repeat for other side.



I ran out of fabric and so had to start piecing it for one side. You can barely see the seam here.



For the short sides, also start by gluing it in along the bottom edge.



Instead of gluing it along the top first, fold over the edge of the fabric and glue it along the edge.This way you get a nice clean edge. I was thinking of adding some pipping too, but I didn't have enough fabric. :(



Finally glue it along the top. and trim any extra off the top. Repeat for other side.



For the bottom I decided to use some Pellon fleece I had on hand. This part is optional. Trace the bottom of your box onto a piece of fleece and cut it out.



Then glue your bottom piece onto your fleece.



Finally glue the fleece piece onto the bottom of your box.





For the lining cut out your 4 side pieces and a bottom piece. I ran out of fabric (only had 1 yrd. on hand) so used some white fabric for the bottom.



First I piece the 4 side pieces together in a long strip and did a quick hem along the edge.



Then I sew it all together in the a tube shape.



Pin on the bottom piece and sew 1/2" along the edge.



I wasn't being very precise and made my lining too big, so I gathered some at the back.



And there it is! I love the fact that I finally have a laundry basket/hamper and it was so inexpensive!



Linking up with- Tatertots and Jello , Flamingo Toes, The Well Crafted Home, The Grant Life,  One Artsy Mama 

Bridal Shower Chair How To

It was my moms idea actually. She wanted a special chair for the occasion so I created a Bridal Shower Chair slipcover.



Complete with a floral back...



and a lovely bow!

You'll need
Approx 2 yards of white cotton fabric (I used 36" muslin because I need the length not width)
And at least 3 yards of tulle. I think it would be better with 6 yards so you could so 2 layers or use something thicker than tulle.

I did this with frugality in mind. The final price was only $5!








Here are my rough measurements.
I was only measuring the padded part of the chair. This is how I pieces my chair:
Starting at the top of the font all the way down to the edge of the bottom. Meaning the entire front piece of the chair was one big piece: 20"x41"
Back width and length: 20"x20"
Vertical Side-over the top-down the other side: 3"x56"
Horizontal side-back of chair-other size: 3"x56.

I added 2" for seam allows and measure large so I'd have plenty of wiggle room.

Cut out all your pieces. If your planning on doing a floral background I'd do so before you continue sewing. I wasn't planning on adding roses so I did it after I finished it over, it was much hard to sew that way! I used extra scraps I had for the bow and for the rose background.



Here I've laid out my main front piece and started pining it tot he top/side piece. Once it was Pined I sew it into place. Next I did added the back, and finally moved onto the back/side/bottom piece.

Once they were all sewed into place I cute my tulle into three piece, sewed them together and trimmed it. Added a gather stitch a, pined it into place and sewed it down.



It was a rather easy and quick project! I think it took me, maybe, 2 hours.



As you can see it was windy outside.

Linking up with- Tatertots and Jello , Flamingo Toes, and The Grant Life.